Cabinet Calculator
Measure the run. Estimate the cabinets. Plan with confidence.
Enter your cabinet run length and project details. We’ll estimate base cabinets, wall cabinets, filler allowance, countertop length and material cost.
Your Cabinet Plan
Enter your cabinet run details above and calculate your cabinet plan.
Save & Follow MyCruncher
Like this calculator? Save it for later and follow MyCruncher for more free calculators.
About the Creator
MyCruncher — Founded by Bobby Dues
MyCruncher provides free online calculators designed to make everyday calculations easier to understand and use.
Meet Bobby Dues →Free Cabinet Calculator – Estimate Base Cabinets, Wall Cabinets and Material Cost
Planning a kitchen remodel, bathroom renovation, or cabinet installation? The free MyCruncher Cabinet Calculator helps estimate cabinet quantities, filler allowance, countertop length, and cabinet material costs.
Whether you're replacing old kitchen cabinets, installing cabinets in a laundry room, or preparing a customer project estimate, knowing your available cabinet space can help you plan your project.
Enter your cabinet run length, average cabinet widths, wall cabinet selection, filler allowance, countertop overhang, and cabinet prices to generate a preliminary estimate.
The calculator provides general planning quantities. A final cabinet layout requires actual cabinet dimensions, appliance clearances, and installation measurements.
How to Use the Cabinet Calculator
The MyCruncher Cabinet Calculator uses eight project inputs to estimate cabinet quantities and material cost.
- Enter the cabinet run length. Measure the length of the cabinet area in feet.
- Select average base cabinet width. Choose an average width for the lower cabinets, such as 30 inches.
- Choose whether to include wall cabinets. Select Yes if your project includes upper wall cabinets, or No for a base-only estimate.
- Select average wall cabinet width. Choose the expected average width of the upper cabinets.
- Choose filler / scribe allowance. Select an additional allowance for layout adjustments and cabinet fillers.
- Select countertop overhang. Choose the appropriate overhang assumption for your project.
- Enter average base cabinet price. Provide an estimated price per base cabinet unit.
- Enter average wall cabinet price. Provide the estimated price of each wall cabinet.
- Click Calculate My Cabinets. The calculator generates a preliminary cabinet material plan.
- Review your results. Check estimated base cabinets, wall cabinets, filler allowance, countertop length, and total cabinet cost.
You can adjust the dimensions, cabinet selections, allowances, or prices to compare different project scenarios.
What Are Linear Feet of Cabinets?
Linear feet measure the horizontal length of a cabinet run.
For example, a straight cabinet run measuring 12 feet has 12 linear feet of available space.
Cabinet layouts are often measured in linear feet because they help establish the amount of available wall space.
However, linear feet do not automatically determine the exact number of cabinet boxes.
Individual cabinets have different widths, heights, depths, and configurations.
How to Measure for Kitchen Cabinets
Before estimating cabinet quantities, carefully measure the available space.
- Measure the wall length. Determine the total distance available for the cabinet run.
- Measure at several heights. Walls may not be perfectly straight or square.
- Locate appliances. Record the planned spaces for refrigerators, ranges, dishwashers, and other equipment.
- Record plumbing locations. Identify sink drains, water lines, and other services that may affect cabinet placement.
- Locate windows and doors. Consider openings, trim, and door swing clearances.
- Check wall height. Record ceiling height and available wall cabinet space.
- Identify corners. Corner cabinets may require special layouts and clearances.
- Allow for fillers. Cabinet doors and drawers may need additional clearance near adjacent walls.
Accurate measurements help prevent cabinet ordering and installation problems.
How Do You Estimate the Number of Cabinets?
A simple preliminary cabinet count compares the available run length with the selected average cabinet width.
First, convert the cabinet run from feet to inches.
Next, divide by the average cabinet width in inches.
For example, a 12-foot run contains 144 inches.
With a planning width of 30 inches:
This suggests roughly five average-sized cabinet units.
However, five actual 30-inch cabinets would total 150 inches and would not fit a 144-inch run.
A practical plan must use an appropriate combination of cabinet widths and filler pieces.
Cabinet Calculation Example
Example: Suppose you're planning kitchen cabinets along a straight 12-foot wall.
You want both base and wall cabinets, with an approximate 30-inch planning width for each type.
Example Cabinet Information
- Cabinet Run: 12 feet
- Average Base Width: 30 inches
- Include Wall Cabinets: Yes
- Average Wall Width: 30 inches
- Filler / Scribe Allowance: 5%
- Countertop Overhang: 1.5 inches
- Base Cabinet Price: $450 each
- Wall Cabinet Price: $325 each
Step 1: Convert the Cabinet Run Into Inches
Multiply the 12-foot run by 12 inches.
Step 2: Estimate Cabinet Units
Divide the available space by the selected 30-inch average.
This provides a rough estimate of approximately five cabinet units.
The exact sizes must still be selected so the cabinets fit within the actual run.
Step 3: Create an Illustrative Cabinet Layout
One possible mixed-width layout uses three 30-inch cabinets and two 24-inch cabinets.
The five cabinets occupy 138 inches.
Subtract that from the 144-inch available run.
This leaves six inches to distribute among appropriate filler and clearance locations.
This is an illustrative layout. Actual appliance openings, cabinet construction, and clearance requirements may require different sizes.
Step 4: Understand the 5% Filler Allowance
Five percent of the 144-inch cabinet run is:
This provides a rough planning reference for additional adjustment space.
The example six-inch gap is within that reference amount.
However, actual filler pieces must be measured and positioned based on the finished cabinet layout.
A percentage allowance does not determine the exact size or number of physical filler strips.
Step 5: Estimate Base Cabinet Cost
Suppose the project includes five base cabinets at an average price of $450.
The illustrative base cabinet material cost is $2,250.
Step 6: Estimate Wall Cabinet Cost
For this example, assume there is enough uninterrupted wall space for five upper cabinets.
At $325 per wall cabinet:
The illustrative wall cabinet material cost is $1,625.
Step 7: Calculate Total Cabinet Cost
Add base cabinet cost and wall cabinet cost.
The estimated cabinet-only material subtotal is $3,875.
This does not include countertop material, fillers, hardware, labor, delivery, or tax.
Step 8: Review Countertop Length
The nominal cabinet run is 12 linear feet.
If a countertop extends 1.5 inches past one exposed end of the run, the illustrative finished length becomes:
That equals 12 feet and 1.5 inches.
If both ends were exposed, the length might need a different allowance.
A front-edge overhang changes countertop depth, not necessarily the length of the run.
Confirm which edges receive overhang before ordering countertops.
Cabinet Calculation Example Summary
| Calculation | Illustrative Result |
|---|---|
| Cabinet Run | 12 ft |
| Run in Inches | 144 in |
| Base Cabinets | 5 Units |
| Wall Cabinets | 5 Units |
| Example Cabinet Widths | 3 × 30 in + 2 × 24 in |
| Actual Example Filler Space | 6 in |
| Base Cabinet Cost | $2,250 |
| Wall Cabinet Cost | $1,625 |
| Cabinet-Only Material Cost | $3,875 |
This example demonstrates how linear footage, cabinet widths, filler planning, and average unit prices can help build a preliminary cabinet estimate.
These figures demonstrate one possible mixed-width layout. They are not the guaranteed results of the live calculator. The calculator's internal allowance and rounding method may differ. Final cabinet quantities require a measured layout with actual cabinet model dimensions.
Base Cabinet Width Comparison Chart
The following table compares different average cabinet widths against a 12-foot or 144-inch run.
| Cabinet Width | Run ÷ Width | Planning Reference |
|---|---|---|
| 18 inches | 8.0 | 8 Units |
| 24 inches | 6.0 | 6 Units |
| 30 inches | 4.8 | About 5 Mixed Units |
| 36 inches | 4.0 | 4 Units |
These are mathematical planning comparisons, not final fitted cabinet layouts.
For example, five actual 30-inch cabinets would require 150 inches, which exceeds the 144-inch available space.
Real installations may use mixed cabinet widths, specialty cabinets, and filler pieces.
Common Kitchen Cabinet Widths
Stock and semi-custom cabinet product lines are available in a variety of widths.
Common nominal widths may include 12, 15, 18, 21, 24, 27, 30, 33, and 36 inches.
Not every manufacturer offers every width or style.
Cabinet dimensions also vary according to door configuration, drawer layout, and construction type.
Before purchasing, check the product specifications for the exact units you plan to install.
What Is the Difference Between Base and Wall Cabinets?
Base Cabinets
Base cabinets are typically installed at floor level and often support countertops.
They may include drawers, shelves, doors, or specialty storage configurations.
Some base cabinets are designed for sinks, cooktops, or specific kitchen appliances.
Wall Cabinets
Wall cabinets, sometimes called upper cabinets, are mounted above floor level.
They can provide storage above countertops and other work areas.
Wall cabinet heights, depths, and widths vary by product line.
The number of wall cabinets does not always equal the number of base cabinets.
Do You Need the Same Number of Wall and Base Cabinets?
Not necessarily. A kitchen may have fewer upper cabinets than base cabinets because of windows, appliances, open shelving, range hoods, or other features.
For example, a kitchen wall may have cabinets below a window but no upper cabinets above it.
Likewise, the space occupied by a range hood may change the upper cabinet layout.
The MyCruncher calculator includes a selection for including or excluding wall cabinets.
Use that setting to compare base-only and base-plus-wall planning scenarios.
What Is a Cabinet Filler Strip?
Cabinet filler strips are finishing pieces used to fill spaces between cabinets, walls, or other boundaries.
They can help create a finished appearance and provide necessary clearance for cabinet doors and drawers.
Fillers can also help accommodate walls that are not perfectly straight or square.
Actual filler requirements depend on the cabinet system and layout.
What Is a Scribe Allowance?
Scribing is a method of fitting a finishing piece to an uneven wall or surface.
A scribe allowance provides additional material that can be trimmed to follow the actual wall profile.
For example, a wall may vary slightly from top to bottom or along its length.
A cabinet installer may cut a filler or finishing panel to fit those irregularities.
The percentage in the MyCruncher calculator should be used as a preliminary planning allowance rather than an exact physical filler design.
Cabinet Filler Allowance Comparison
The following table shows what several percentage allowances represent mathematically when applied to a 144-inch cabinet run.
| Allowance | Equivalent Length |
|---|---|
| 0% | 0 in |
| 2% | 2.88 in |
| 5% | 7.20 in |
| 8% | 11.52 in |
| 10% | 14.40 in |
These are mathematical percentage equivalents, not recommended physical filler strip widths.
Actual filler dimensions must be based on the installed cabinet layout, door clearances, and wall conditions.
A particular installation may require less or more space than these examples.
Why Do Cabinet Layouts Need Fillers?
Kitchen walls rarely divide perfectly into standard cabinet widths.
A layout can also require extra clearance at corners, against walls, or next to appliances.
For example, a drawer may need additional clearance to open without contacting adjacent trim or hardware.
Corner cabinet doors can also require special spacing.
A properly sized filler can address some of these issues, depending on the cabinet system.
Follow the manufacturer's installation guide before choosing the final filler locations and widths.
How Do You Calculate Countertop Length?
Countertop linear footage describes the length of the countertop along the cabinet run.
For a straight 12-foot cabinet run, the nominal length is 12 linear feet before considering finished overhangs.
Additional length may be required at exposed ends.
However, countertop overhang at the front edge affects the countertop's depth rather than its linear run length.
The final dimensions should be taken after cabinets are positioned and leveled.
What Is Countertop Overhang?
Countertop overhang is the distance the finished countertop extends past an underlying cabinet or supporting surface.
Overhang may be present along the front edge, at exposed ends, or in areas designed for seating.
The appropriate amount depends on countertop material, cabinet construction, support requirements, and design.
Some larger overhangs may require additional structural support.
Use the selected overhang setting for preliminary planning, then confirm the final countertop dimensions with the fabricator or installer.
How Do You Calculate Countertop Square Footage?
Countertop length and countertop square footage are different measurements.
Linear feet measure length. Square feet measure surface area.
For a simple rectangular countertop, multiply length by depth using compatible units.
Countertop Area Example
Suppose the finished countertop length is 12.125 feet, including a 1.5-inch extension at one exposed end.
For illustration, assume a finished countertop depth of 25 inches.
Convert 25 inches to feet:
Multiply length by depth.
The illustrative countertop surface area is approximately 25.26 square feet.
Actual countertop area depends on the finished dimensions, cutouts, joints, corners, and other details.
The main Cabinet Calculator estimates countertop length, not a complete countertop fabrication or square-foot material takeoff.
How Much Do Kitchen Cabinets Cost?
Cabinet material cost depends on the quantity, cabinet type, construction, finish, accessories, and selected product line.
The MyCruncher Calculator uses average unit prices entered by the user.
This makes it possible to compare hypothetical cabinet budgets without relying on a fixed market price.
Base Cabinet Cost Formula
Wall Cabinet Cost Formula
Combined Cabinet Cost Formula
Actual costs may vary because individual cabinets can have different prices and sizes.
Cabinet Material Cost Comparison
The following table uses illustrative average unit prices of $450 for base cabinets and $325 for wall cabinets.
Each row assumes the same number of base and wall cabinet units.
| Units of Each Type | Base Cost | Wall Cost | Total |
|---|---|---|---|
| 3 Each | $1,350 | $975 | $2,325 |
| 4 Each | $1,800 | $1,300 | $3,100 |
| 5 Each | $2,250 | $1,625 | $3,875 |
| 6 Each | $2,700 | $1,950 | $4,650 |
These are price comparisons only. They do not represent verified layouts fitting a particular wall length.
Actual cabinet cost depends on the purchased unit schedule.
Base Cabinets Only vs. Base and Wall Cabinets
Some projects include only base cabinets.
Others include both lower and upper cabinet storage.
The wall cabinet selection allows you to compare these broad material scenarios.
Base-Only Example
Five base cabinets at $450 each:
Base and Wall Cabinet Example
Add five wall cabinets at $325 each.
The illustrative difference between these cabinet-only material scenarios is $1,625.
Adding wall cabinets can also introduce additional installation and finishing expenses.
How Do Appliances Affect Cabinet Quantities?
A kitchen cabinet run may include spaces for appliances that interrupt the cabinet boxes.
For example, a 12-foot wall may contain a range or refrigerator opening.
Those spaces should not be counted as if they contain standard cabinet boxes.
Appliance Opening Example
Suppose a 144-inch wall includes one 30-inch range opening.
The remaining 114 inches provide a starting point for the cabinet sections around the range.
Actual cabinet selection must also consider appliance clearances, installation specifications, fillers, and adjacent cabinetry.
The basic calculator does not include separate fields for appliance openings.
Measure usable cabinet runs separately when appliances interrupt the layout.
How Do Sink Cabinets Affect a Layout?
A sink base cabinet may have special dimensions and interior clearances for plumbing.
Sink selection can influence the minimum cabinet width and configuration needed.
Dishwashers, garbage disposals, water supply lines, and drain connections can also affect the surrounding cabinet layout.
Choose the actual sink and appliance requirements before finalizing cabinet unit sizes.
An average-width calculator cannot determine the correct sink base cabinet for a specific sink model.
How Do Corner Cabinets Affect Cabinet Counts?
L-shaped and U-shaped kitchens often require special consideration at inside corners.
Corner cabinets may use different dimensions from standard straight cabinet units.
Blind-corner cabinets and other corner storage systems may also require specific clearances.
For a preliminary estimate, measure each usable cabinet section carefully.
Avoid counting the same physical corner space twice when combining runs.
Final quantities should be based on a detailed cabinet layout.
How to Estimate Cabinets for an L-Shaped Kitchen
An L-shaped kitchen may have cabinet runs along two adjoining walls.
Suppose one wall measures 10 feet and the other measures 8 feet.
The combined wall lengths equal 18 linear feet.
However, this does not mean 18 linear feet of ordinary straight cabinets can fit without adjustment.
Corner cabinetry, appliance openings, fillers, and overlapping corner measurements can change the usable lengths.
For better planning, measure each section and prepare a cabinet layout before ordering.
How to Estimate Cabinets for a Laundry Room
Laundry rooms may use cabinets above washers and dryers, alongside utility sinks, or over work surfaces.
Some laundry room projects require only wall cabinets. Others include base cabinets with a countertop.
Before calculating, identify the available wall length and appliance spaces.
Review the clearances required for washer lids, dryer doors, ventilation, and utility connections.
Cabinet mounting and wall support must also meet the manufacturer's requirements.
How to Estimate Bathroom Vanity Cabinets
Bathroom vanity projects can involve a single cabinet, multiple base units, or custom configurations.
The required dimensions depend on the sink, plumbing, door clearances, and bathroom layout.
A vanity cabinet may not have the same depth or height as a standard kitchen base cabinet.
Use actual vanity product dimensions when preparing the final order.
The Cabinet Calculator can provide rough unit and cost planning, but it does not independently design a bathroom vanity.
Stock vs. Semi-Custom vs. Custom Cabinets
Kitchen cabinets are commonly described by their degree of customization and available design options.
Stock Cabinets
Stock cabinets are commonly offered in predetermined sizes, styles, and finishes.
Available options depend on the manufacturer and product line.
Semi-Custom Cabinets
Semi-custom cabinet programs may provide additional dimensions, finishes, and configuration options.
The available modifications vary by manufacturer.
Custom Cabinets
Custom cabinets may be designed around specific project dimensions and requirements.
Cost, lead time, and installation requirements vary based on the design and fabricator.
When comparing prices, use actual quotes for the desired cabinet construction and specifications.
What Expenses Are Not Included in the Cabinet Estimate?
The MyCruncher Cabinet Calculator focuses on cabinet quantities, filler allowance, countertop length, and cabinet material cost.
A complete cabinet installation may involve many additional expenses.
- Countertops. Material, fabrication, cutouts, edging, and installation.
- Cabinet fillers. Physical filler strips and finished panels.
- Hardware. Knobs, pulls, hinges, and specialty accessories.
- Toe-kick and trim. Finishing materials used around the cabinets.
- Installation labor. Layout, leveling, anchoring, fitting, and adjustments.
- Demolition. Removal and disposal of existing cabinets.
- Wall repairs. Drywall, backing, and surface repairs when needed.
- Plumbing. Changes related to sinks and water connections.
- Electrical work. Work involving outlets, lighting, or appliances.
- Delivery. Shipping and material handling.
- Sales tax. Applicable purchasing taxes and charges.
- Permits. Required approvals and inspections for applicable work.
These items should be estimated separately when creating a complete project budget.
Cabinet Installation Budget Example
The following table illustrates how cabinet-only material cost can differ from a broader project budget.
All amounts are hypothetical and are not current contractor or supplier quotes.
| Expense | Example Cost |
|---|---|
| Base and Wall Cabinets | $3,875 |
| Fillers and Panels | $120 |
| Cabinet Hardware | $300 |
| Countertop Allowance | $1,800 |
| Cabinet Installation Labor | $1,400 |
| Delivery and Other Charges | $200 |
| Illustrative Project Subtotal | $7,695 |
This demonstrates why the cost of purchased cabinet boxes is not the same as the total cost of a kitchen cabinet project.
Additional plumbing, electrical work, demolition, permits, taxes, and unexpected conditions may further change the total.
For a more complete project estimate, use MyCruncher Cost Estimator Pro.
Why Is Proper Cabinet Installation Important?
Cabinet installation involves more than placing boxes side by side.
Cabinets must be properly aligned, leveled, supported, and secured according to their manufacturer requirements.
Wall cabinets must be fastened to suitable structural support using appropriate hardware and installation methods.
Countertops, especially heavy stone materials, may require additional support.
The Cabinet Calculator does not evaluate wall strength, fastener capacity, cabinet anchorage, or structural safety.
Follow the manufacturer's installation instructions and seek qualified assistance when needed.
Helpful Tips for Planning Cabinet Installation
- Measure more than once. Confirm the actual run length and wall conditions.
- Record appliance dimensions. Allow the correct spaces for refrigerators, ranges, and dishwashers.
- Select cabinet models early. Use exact manufacturer widths when planning.
- Plan corners carefully. Corner configurations can affect cabinet placement and access.
- Allow appropriate fillers. Verify clearance requirements for doors and drawers.
- Check upper cabinet space. Account for windows, range hoods, and ceiling height.
- Confirm countertop dimensions. Identify exposed ends and required overhangs.
- Include finishing materials. Plan for panels, trim, toe-kicks, and hardware.
- Compare actual prices. Cabinet unit prices vary by size, style, and supplier.
- Budget for installation. Labor and site preparation can significantly affect cost.
- Verify structural support. Follow the manufacturer's cabinet anchoring instructions.
- Review the final layout. Confirm all cabinets, clearances, and dimensions before ordering.
Frequently Asked Questions
What is a cabinet calculator?
A cabinet calculator estimates cabinet quantities and costs from available run length, average unit widths, and selected project details.
How do I calculate how many cabinets I need?
Measure the available cabinet run and convert it to inches.
Divide by the average cabinet width for a rough starting estimate, then create a layout using actual cabinet dimensions.
How many cabinets fit on a 12-foot wall?
The answer depends on the cabinet widths, appliances, fillers, and layout.
A 12-foot wall contains 144 inches.
For example, four 36-inch cabinets total 144 inches before fillers.
A mixed-width layout can also use five or more smaller cabinets.
How many 30-inch cabinets fit on a 12-foot wall?
Four full 30-inch cabinets occupy 120 inches, leaving 24 inches.
Five full 30-inch cabinets would require 150 inches and would not fit the 144-inch run.
What is a linear foot of cabinets?
A linear foot measures 12 inches of horizontal cabinet run.
It describes length rather than the number of cabinet units.
Is linear footage the same as cabinet count?
No. Cabinet count depends on the widths of the individual units selected.
What is the average width of a kitchen cabinet?
Cabinet widths vary by manufacturer, type, and configuration.
The calculator allows you to select an average planning width rather than assuming every cabinet has one size.
Are base and wall cabinets the same size?
Not necessarily. They can differ in width, height, depth, and construction.
The calculator includes separate average width selections for base and wall cabinets.
Does the calculator estimate wall cabinets?
Yes. Select Yes under Include Wall Cabinets to include a wall cabinet estimate.
Can I estimate base cabinets only?
Yes. Choose No under Include Wall Cabinets for a base-only planning scenario.
What is cabinet filler allowance?
It is a planning allowance for layout adjustments, filler pieces, and scribe requirements.
The exact physical filler dimensions must be determined from the actual cabinet layout.
What is a scribe strip?
A scribe or filler piece may be trimmed to fit the shape of an uneven wall.
It helps finish the gap between the cabinet and adjacent surface.
Is a 5% filler allowance enough?
It may provide a useful rough planning reference, but the correct amount depends on cabinet dimensions, wall conditions, and clearance requirements.
Verify actual filler measurements before ordering.
Does filler allowance mean I should buy extra cabinets?
Not necessarily. Cabinet filler material is different from an additional complete cabinet unit.
Review the calculator estimate and final cabinet schedule separately.
What is countertop overhang?
It is the distance a countertop extends past its supporting cabinetry or other underlying surface.
Does countertop overhang increase countertop length?
An overhang at an exposed end can increase finished length.
A front-edge overhang generally affects depth rather than run length.
How many linear feet of countertop do I need?
Start with the intended cabinet run and account for actual countertop boundaries, exposed ends, and overhangs.
Final measurements should be confirmed after cabinets are installed.
How do I calculate countertop square footage?
Multiply the finished countertop length by its depth using compatible units.
For complex countertops, account for multiple sections, corners, cutouts, and fabrication details.
Does the Cabinet Calculator include countertop cost?
The main calculator shows estimated countertop length and cabinet material cost.
A complete countertop material and installation estimate should be prepared separately.
How do I estimate cabinet material cost?
Multiply the estimated base cabinet quantity by the average base unit price.
Do the same for wall cabinets when included, then add the amounts together.
How much do five base cabinets cost?
At an illustrative average price of $450 each, five base cabinets cost $2,250 before additional expenses.
How much do five wall cabinets cost?
At an illustrative average price of $325 each, five wall cabinets cost $1,625.
Does the calculator include cabinet installation labor?
No. Installation labor should be estimated separately from the basic cabinet material cost.
Does the calculator include cabinet hardware?
It does not separately calculate knobs, pulls, hinges, or other accessories.
Include those costs in a complete project budget.
Does the calculator include appliances?
No. The calculator does not have individual appliance dimension or pricing inputs.
Account for appliance spaces when determining usable cabinet runs.
Can I calculate cabinets for an L-shaped kitchen?
You can estimate straight sections individually.
However, corner cabinets and overlapping measurements require a detailed layout.
Can I calculate cabinets for a U-shaped kitchen?
The calculator can provide preliminary estimates for individual straight sections.
A complete U-shaped layout requires additional consideration of corners, appliances, fillers, and clearances.
Can I use the calculator for bathroom vanities?
It can help with preliminary cabinet quantity and price estimates.
Use the actual vanity dimensions and plumbing requirements for the final design.
Can I use it for laundry room cabinets?
Yes, for preliminary planning of cabinet runs, quantities, and costs.
Verify appliance, plumbing, and wall mounting requirements.
Does the calculator include pantry cabinets?
The visible calculator inputs focus on base and wall cabinet types.
Tall pantry cabinets may require separate quantity and cost planning.
What is the difference between stock and custom cabinets?
Stock cabinets are generally offered in predetermined sizes and configurations.
Custom cabinets may be made for specific project dimensions and design requirements.
Why does my cabinet installer recommend a different count?
An installer may account for exact cabinet models, appliances, corner details, fillers, end panels, and required clearances.
These factors may not be fully represented in a basic average-width estimate.
Does the calculator create a cabinet cutting or installation plan?
No. It provides preliminary quantities and costs rather than a complete cabinet layout or installation drawing.
Does the calculator verify wall mounting safety?
No. Wall cabinet support, fastening, and structural requirements must be verified separately.
Do I need a permit to replace kitchen cabinets?
Requirements vary depending on the jurisdiction and the scope of work.
Electrical, plumbing, or structural changes may trigger additional requirements.
Contact your local building department when needed.
Are cabinet estimates guaranteed?
No. Actual quantities and prices depend on the selected cabinet models, layout, site measurements, and supplier charges.
Is the MyCruncher Cabinet Calculator free?
Yes! The MyCruncher Cabinet Calculator is free to use for estimating base cabinets, wall cabinets, filler allowance, countertop length, and cabinet costs.
Explore More Free Home & DIY Calculators
Installing new kitchen or bathroom flooring? Try the Flooring Calculator to estimate square footage, waste allowance, boxes needed, and material cost.
Painting kitchen walls or cabinet surroundings? Use the Paint Calculator to estimate wall area, paint gallons, primer, and material cost.
Need construction measurements for your project? Explore the Construction Pro Calculator for useful construction math and measurement tools.
Building a complete cabinet installation estimate? Try Cost Estimator Pro to include materials, labor, equipment, overhead, profit, and tax.
Planning another home improvement project? Use the Deck Calculator to estimate deck area, boards, waste, and material costs.
Want to add free calculators to your website? Visit the Free Calculator Embeds Library to explore the Cabinet Calculator widget and other useful tools.
For more information about installing cabinet filler pieces, visit the IKEA Kitchen Installation Guide .
Discover additional free construction, home improvement, measurement, and everyday calculators at MyCruncher.com .
Important: The MyCruncher Cabinet Calculator provides preliminary educational planning and material cost estimates. Actual cabinet quantities, filler needs, countertop dimensions, and purchase costs depend on exact cabinet specifications, appliance openings, corners, wall conditions, installation requirements, and supplier pricing. The calculator does not create a complete cabinet design, verify structural support, or determine building-code compliance. Confirm all measurements, clearances, materials, and installation requirements with the cabinet manufacturer, supplier, or qualified installer before purchasing or beginning work.